used to convert force measure signal to digital communication signal, standard analog outputsignal and used in simple control project


Summary

 

used to convert force measure signal to digital communication signal, standard analog outputsignal and used in simple control project


Application 

 

convert force measure signal to digital communication signal, standard analog outputsignal and used in simple control project


Detail information

 

1. meter size 

 

 

04 S.png


 

3. meter parameter

 

 

Specification Technique 
input Sensitivity0.4mv/v to 6mv/v
Display
    single row 6 digit Led digital tube shows
Display   accuracy 1/10000
sensor Excitation   Voltage5VDC±2%,100mA ( 6pcs   350ohm sensor)
Power supplyDC: 9-30V
Acquisition   frequency≥100-5000HZ
Operation temp   range-30~60℃
output rate10 、40、640、1280   times/second
InterfaceRS485+RS232/ RS485+AnalogOutput               (0~±10V/0~±5V/0~20mA/4~20mA)
withstand   voltage 2000V AC50/60Hz 1   minute
Surrounding   environmenttemperature:-10~55℃;storage:-25~65℃   humidity:35~85%RH;storage:35~85%RH
Switching value2   points relay output 250VAC/3A    Resistive load
    3-point transistor output    
    24V/1A Load capacity, 1 input
IP classIP64
Optional   specification 
Analog   output A0010~±10V、0~20mA、4~20mA;resolution   1/3000
Communication   outputCM01Rs232. support Modbus   RTU and free protocol
CM02RS485.Up   to 32 nodes in parallel. support Modbus RTU and free protocol



DESCRIPTION

0-20ma 4-20ma 0-10v 1-5v RS232/RS485 meter FA04

LEAVE A MESSAGE